OK,
Done with the hoses, then replaced swivel housing grease and replaced the steering stabilizer. It seems to drive much better now.
Also greased the Driveshafts and a couple little things.
Another thing I worked on, is the shifter tape that was incorrectly placed at the bottom instead of between the plastic and the holder. Now it looks nicer and tight no gaps. And I can actually see what gear I am using ;)
Unless something breaks the truck is ready for this summer ;)
Saturday, June 16, 2007
Monday, June 11, 2007
It was bleeding and is green!!!!
Yep,
the hose from radiator to water pump broke.
So I decided to go ahead and replaced all the hoses.
Boy I am tired, and still need to finish it!, but I found out that one of the heater hoses was on its way to hell, so I think I did the right thing replacing them all.
This summer is getting close, I am going to do soon the steering stabilizer and change the housing grease (I got them from Cerrone's) and should be good to go to Shaver Lake this summer.
Later.
the hose from radiator to water pump broke.
So I decided to go ahead and replaced all the hoses.
Boy I am tired, and still need to finish it!, but I found out that one of the heater hoses was on its way to hell, so I think I did the right thing replacing them all.
This summer is getting close, I am going to do soon the steering stabilizer and change the housing grease (I got them from Cerrone's) and should be good to go to Shaver Lake this summer.
Later.
Saturday, May 12, 2007
Maintenance done (finally)
Well,
I had two pending issues, one oil & filter change and the other the transfer case.
Transfer case oil was low and black (as always), so I decided to change the oil for fresh ATF + some lucas.
Oil was dirty already and the pressure light was on when idling and hot, so I changed the oil (with Castrol 20w50 and lucas oil treatment too) and filter (now K&N 3001).
I used a little leftover seafoam to clean the engine before changing the oil.
I created a very nice mess all over the garage :)
I think now, I am done with the main issues and maintenance. Miles today 51133.
Getting ready for the summer trip to the North.
Also, got a free Brush Bar (thanks Joe!!) and I've been working on it to get rid of rust and whatnots. I'll install soon. Somehow I always wanted one, I know they are mostly useless, but what the ..., I'll install it for a while. The price was right ;)
Also, last week I patched a exhaust leak I had, we'll see how long it lasts.
Cheers.
I had two pending issues, one oil & filter change and the other the transfer case.
Transfer case oil was low and black (as always), so I decided to change the oil for fresh ATF + some lucas.
Oil was dirty already and the pressure light was on when idling and hot, so I changed the oil (with Castrol 20w50 and lucas oil treatment too) and filter (now K&N 3001).
I used a little leftover seafoam to clean the engine before changing the oil.
I created a very nice mess all over the garage :)
I think now, I am done with the main issues and maintenance. Miles today 51133.
Getting ready for the summer trip to the North.
Also, got a free Brush Bar (thanks Joe!!) and I've been working on it to get rid of rust and whatnots. I'll install soon. Somehow I always wanted one, I know they are mostly useless, but what the ..., I'll install it for a while. The price was right ;)
Also, last week I patched a exhaust leak I had, we'll see how long it lasts.
Cheers.
Saturday, April 28, 2007
Fixing rear door
This weekend has been more about spending time with my family than working on the RRC.
Although, I managed to fix the annoying problem with one of the rear doors, which wouldn't open from outside unless you tried 3 or 5 times.
Wasn't too bad, but I had to take the whole thing out to clean and adjust the rod properly. Now works great.
I've been driving the truck around town and all the work I've done recently seems to hold very well.
Anyway, more later....
Although, I managed to fix the annoying problem with one of the rear doors, which wouldn't open from outside unless you tried 3 or 5 times.
Wasn't too bad, but I had to take the whole thing out to clean and adjust the rod properly. Now works great.
I've been driving the truck around town and all the work I've done recently seems to hold very well.
Anyway, more later....
Sunday, April 22, 2007
Axle oil and lock actuator
Well,
I checked axle oil level and not only was low, but black, very black.
So I change the oil in both axles at 51045 Miles (not real total millage).
Swivel housings are OK, they have grease and are not dry. Good enough for me, for now. I'll replace the grease at one point soon.
Also, I took the actuator from the drivers door out and checked it, big capacitor was toasted, replaced it with something I had around, but not quite working properly, so I decided to fix my actuator with a $2 fix.
I bought a double circuit switch from Radio Shack, +V and GND get in there, and depending on the position it goes either nowhere (central pos) , +V GND , or GND +V. It works. You need to be careful not to leave it on too long or the actuators on the doors will fry, but it *does* work for now. Good enough.
I put the headliner back on the sunroof, without the guides, guess what? it works great, so now I have my headliner back there too.
I need to change the oil, I'll do that soon.
Temp still good never over 1/2 so far.
I checked axle oil level and not only was low, but black, very black.
So I change the oil in both axles at 51045 Miles (not real total millage).
Swivel housings are OK, they have grease and are not dry. Good enough for me, for now. I'll replace the grease at one point soon.
Also, I took the actuator from the drivers door out and checked it, big capacitor was toasted, replaced it with something I had around, but not quite working properly, so I decided to fix my actuator with a $2 fix.
I bought a double circuit switch from Radio Shack, +V and GND get in there, and depending on the position it goes either nowhere (central pos) , +V GND , or GND +V. It works. You need to be careful not to leave it on too long or the actuators on the doors will fry, but it *does* work for now. Good enough.
I put the headliner back on the sunroof, without the guides, guess what? it works great, so now I have my headliner back there too.
I need to change the oil, I'll do that soon.
Temp still good never over 1/2 so far.
Sunday, April 15, 2007
Thermostat and temp sensors
This weekend I did refill to the right amount the auto transmission. It was a little over a quarter low, added the Lucas treatment too now it drives very smooth.
Check the tires, 2 were kind of low, I am trying with 30ish front 38ish rear.
I did replace all the temp sensors (the one for the ECU and the one for the instruments) with the thermostat. I found out the thermostat there was upside down and probably the wrong type. Other than making a pretty mess with coolant, pretty straightforward and kind of fun.
Refilled coolant and now it seems to work just great. Temp works as intended so I believe it was not overheating just bad reading on the temp sensor.
We'll see how all this holds up.
Check the tires, 2 were kind of low, I am trying with 30ish front 38ish rear.
I did replace all the temp sensors (the one for the ECU and the one for the instruments) with the thermostat. I found out the thermostat there was upside down and probably the wrong type. Other than making a pretty mess with coolant, pretty straightforward and kind of fun.
Refilled coolant and now it seems to work just great. Temp works as intended so I believe it was not overheating just bad reading on the temp sensor.
We'll see how all this holds up.
Monday, April 02, 2007
Rowher trail
Finally off road.
I thought I was not going to make it, because the fuel pump relay died on me Friday but I was able to find one at NAPA on Saturday.
So off we went, lots of fun and as a sample here are some pictures:
I thought I was not going to make it, because the fuel pump relay died on me Friday but I was able to find one at NAPA on Saturday.
So off we went, lots of fun and as a sample here are some pictures:
Tuesday, March 27, 2007
mmmm
Big emergency the power steering box was leaking!
But then, it was just the adjustment screw/nut that got loose, I should have done them tighter, anyway, no big deal not much fluid out and back to business.
I've found the leak on the radiator, it is not a new one, I can see old coolant dry just there, is in one of the sides (the one that looks like they hit something with as there is a tiny bump on the cross member).
As it is not loosing enough to take the level down from full, I'll keep an eye on it, maybe I'll try adding some stop a leak kind of thing, but down the road I see a new radiator.
But then, it was just the adjustment screw/nut that got loose, I should have done them tighter, anyway, no big deal not much fluid out and back to business.
I've found the leak on the radiator, it is not a new one, I can see old coolant dry just there, is in one of the sides (the one that looks like they hit something with as there is a tiny bump on the cross member).
As it is not loosing enough to take the level down from full, I'll keep an eye on it, maybe I'll try adding some stop a leak kind of thing, but down the road I see a new radiator.
Wednesday, March 21, 2007
sunroof? check
I fixed the sunroof!!!!!!
the usual ground is missing on #2 and #4 on the microswitch, soldered a good ground to #2 and attached it to one of the bolts of the motor and , TADAAAh ! sunroof works great.
Of course, after getting rid of the headliner there it goes very nicely I'll leave it this way, maybe I'll wrap the sunroof metal with the old headliner so it looks more like "interior roof" that bare metal. I'll think about it.
The thing that made me suspect this one is that #2 and #4 had continuity but there was no continuity for any ground spot, so I said let's see if it is the problem mentioned in rangerovers.net or not.
I realized the stop points are out of place but who cares? I'll live with it unless I can figure it out easily.
Also, I've found some coolant leak under the radiator, but I can't find the leak source and it doesn't seem to be too much (expansion bottle is still full) so I'll keep an eye on it.
I had 3 bolts on the exhaust headers very loose, so I tight them up a little.
It never ends, does it? good thing I am having fun (still)
the usual ground is missing on #2 and #4 on the microswitch, soldered a good ground to #2 and attached it to one of the bolts of the motor and , TADAAAh ! sunroof works great.
Of course, after getting rid of the headliner there it goes very nicely I'll leave it this way, maybe I'll wrap the sunroof metal with the old headliner so it looks more like "interior roof" that bare metal. I'll think about it.
The thing that made me suspect this one is that #2 and #4 had continuity but there was no continuity for any ground spot, so I said let's see if it is the problem mentioned in rangerovers.net or not.
I realized the stop points are out of place but who cares? I'll live with it unless I can figure it out easily.
Also, I've found some coolant leak under the radiator, but I can't find the leak source and it doesn't seem to be too much (expansion bottle is still full) so I'll keep an eye on it.
I had 3 bolts on the exhaust headers very loose, so I tight them up a little.
It never ends, does it? good thing I am having fun (still)
Monday, March 19, 2007
more body/electrical stuff
Well,
regarding the passenger seat, the motor that handles the reclining part is dead, it wouldn't move and will take the Volts down, probably too much crap in there. As removing it without removing the seat is hard, I plugged my drill into the cables to adjust the seat to a reasonable position and I am done for now.
After making the stereo work, I realized the speakers are pretty much useless: 2 dead ones on the back, 2 almost dead in the front doors and 2 way rusty although good in the lower end of the front doors. Oh well, I'll have to replace them all, I am wondering where could I get something cheap that works OK?
The sunroof on my RRC wasn't working for 2 reasons, the headliner and the roof. The roof itself had been beaten very badly, I tried to fix it, but there is always something that could touch the sliding mechanism. Also, the design is not too good, so the whole set headliner-sunroof is just too heavy, too easy to get stuck and not so easy to move. I decided to try without the headliner part and it flies now! I got no Voltage on the microswitch, so next day, I'll see what is going on, I suspect the ground because the fuse is intact and the motor worked before, plus I get no V on the cables so it is either the 12V or Gnd failing. Then again, I'll find out.
I tried to plan a little route to Ojai this Saturday but the offroad trails are closed. I really wanted to take my daughter wheeling in her birthday!
I'll see if I can get anything else around here not too extreme so she could come along and maybe even the little one.
ENOUGH said.
regarding the passenger seat, the motor that handles the reclining part is dead, it wouldn't move and will take the Volts down, probably too much crap in there. As removing it without removing the seat is hard, I plugged my drill into the cables to adjust the seat to a reasonable position and I am done for now.
After making the stereo work, I realized the speakers are pretty much useless: 2 dead ones on the back, 2 almost dead in the front doors and 2 way rusty although good in the lower end of the front doors. Oh well, I'll have to replace them all, I am wondering where could I get something cheap that works OK?
The sunroof on my RRC wasn't working for 2 reasons, the headliner and the roof. The roof itself had been beaten very badly, I tried to fix it, but there is always something that could touch the sliding mechanism. Also, the design is not too good, so the whole set headliner-sunroof is just too heavy, too easy to get stuck and not so easy to move. I decided to try without the headliner part and it flies now! I got no Voltage on the microswitch, so next day, I'll see what is going on, I suspect the ground because the fuse is intact and the motor worked before, plus I get no V on the cables so it is either the 12V or Gnd failing. Then again, I'll find out.
I tried to plan a little route to Ojai this Saturday but the offroad trails are closed. I really wanted to take my daughter wheeling in her birthday!
I'll see if I can get anything else around here not too extreme so she could come along and maybe even the little one.
ENOUGH said.
Wednesday, March 14, 2007
radio
Finally I have a radio!
after playing around with the cables I figured it out, it works great now (well some speakers are gone).
The leak is gone too, no more coolant leak so far.
after playing around with the cables I figured it out, it works great now (well some speakers are gone).
The leak is gone too, no more coolant leak so far.
Saturday, March 10, 2007
Nice day of work
I did again the steering backslash adjustment, and now it does make a big difference!
The steering feels just right, no extra tight spots just great and the vague steering is all gone. I love the handling now.
Also, I fixed the fiber optic that lights up the speedometer gauge, now I get my red needle!
Next is the passenger recliner, the cable is broken and the motor goes one way for now. Oh well, I'l'l work on that one day.
Now that I can see how fast I am going on the night and can actually steer properly there is no reason not to go offroading.
Also, I addressed a coolant leak, it looks like the bolts were too loose in the intake warmer thing, so far no leaks but they may be back, it is a Land Rover :)
Dirt, there I go!!!!
The steering feels just right, no extra tight spots just great and the vague steering is all gone. I love the handling now.
Also, I fixed the fiber optic that lights up the speedometer gauge, now I get my red needle!
Next is the passenger recliner, the cable is broken and the motor goes one way for now. Oh well, I'l'l work on that one day.
Now that I can see how fast I am going on the night and can actually steer properly there is no reason not to go offroading.
Also, I addressed a coolant leak, it looks like the bolts were too loose in the intake warmer thing, so far no leaks but they may be back, it is a Land Rover :)
Dirt, there I go!!!!
Friday, March 09, 2007
Road trip or something
I took this thing to work yesterday.
It went and came back!!!!
I guess it works (still), I need to play around with the steering adjustment a little bit more it is way too loose to feel responsive, but anyway...
Also, the coolant sensor (still works!!!!) reminded me that I have a tiny leak and that I needed a refill (well, the truck).
It also runs a little on the warm side, I'll have to keep an eye on the cooling system to avoid overheating it.
Other than that it can keep up 65-70 Mph when asked (well it says more like 60-65 but if you do the math with the tires...) and the only "but" I've found is the kickdown, it doesn't seem to work from 4th to 3rd.
I read it could be a seized valve on the tranny. Oh well, I hope it is not too bad. I'll check the kick down cable just in case.
I think next week I'll try Area 51 in Rowher flat and see what's up with this truck offroad. Is about time!
It went and came back!!!!
I guess it works (still), I need to play around with the steering adjustment a little bit more it is way too loose to feel responsive, but anyway...
Also, the coolant sensor (still works!!!!) reminded me that I have a tiny leak and that I needed a refill (well, the truck).
It also runs a little on the warm side, I'll have to keep an eye on the cooling system to avoid overheating it.
Other than that it can keep up 65-70 Mph when asked (well it says more like 60-65 but if you do the math with the tires...) and the only "but" I've found is the kickdown, it doesn't seem to work from 4th to 3rd.
I read it could be a seized valve on the tranny. Oh well, I hope it is not too bad. I'll check the kick down cable just in case.
I think next week I'll try Area 51 in Rowher flat and see what's up with this truck offroad. Is about time!
Monday, March 05, 2007
Sunday, March 04, 2007
Trail ready, or as ready as it is going to be
Well,
another weekend of work on this RRC, I adjusted the steering wheel (what a pain to reach there) not much difference but at least it is more predictable when steering.
Did some painting and oiling of rusted spots and faded areas (black areas).
Also got rid of the disgusting sun shade film on the windows.
Anyway, it drives nice now and it is pretty much ready for the trails, so soon I'll head somewhere to give it a try off road.
I'll post a pic soon.
another weekend of work on this RRC, I adjusted the steering wheel (what a pain to reach there) not much difference but at least it is more predictable when steering.
Did some painting and oiling of rusted spots and faded areas (black areas).
Also got rid of the disgusting sun shade film on the windows.
Anyway, it drives nice now and it is pretty much ready for the trails, so soon I'll head somewhere to give it a try off road.
I'll post a pic soon.
Friday, February 23, 2007
Electrical stuff
I did some more research and finally I solved the problem with the oil light.
I can't believe it, but it turned out to be a broken copper line in the instrument cluster PCB.
It is a tiny, invisible pretty much, crack. I found it with the tester because it didn't make sense I had the right stuff at the connectors but the light was not on *ever*.
Anyway, that is fixed.
The lights for the instrument cluster were all gone, all 6 of them!! talk about weird stuff.
Oh well, at least, now I have the oil light functional and it was easy enough.
More soon...
I can't believe it, but it turned out to be a broken copper line in the instrument cluster PCB.
It is a tiny, invisible pretty much, crack. I found it with the tester because it didn't make sense I had the right stuff at the connectors but the light was not on *ever*.
Anyway, that is fixed.
The lights for the instrument cluster were all gone, all 6 of them!! talk about weird stuff.
Oh well, at least, now I have the oil light functional and it was easy enough.
More soon...
Sunday, February 18, 2007
Electrical assorted work
Well,
this weekend was the turn of the assorted bulbs. Replaced some, although I cannot find the side markers on the rear ones (12V/4W) or the whole bulb/holder (12V/1.2W) for the warning lights on the instrument cluster.
Good thing I did, because I discovered cables that lost the isolation completely on the left side flasher/parking light, I replaced the whole set of cables, just in case.
I did the whole installation to the radio/cassette I got with the RRC, but it doesn't work at all, I think the radio is broken, it won't do anything. Oh, well, I guess I may try to repair or I'll just try to get a cheap replacement.
The oil warning light and the lights (6) for the instrument cluster, won't work. I do suspect the multi-function thingy in there, but I'll have to dig deeper.
I found out that some previous owner "bridged" a cheapo flasher (F550) on top of the original unit, it works, it's just, "lame".
I tried to check the oil level on the swivel pins. I'll try later, that is some serious stuck bolt, no way I can move the bolts for now.
I did close the sunroof manually, for the time being, I won't use it, although, I'll attempt some repair later on.
Other than that, It seems to be OK, as soon as I fix the oil light/instruments light issue I'll be on my way to the trails.
this weekend was the turn of the assorted bulbs. Replaced some, although I cannot find the side markers on the rear ones (12V/4W) or the whole bulb/holder (12V/1.2W) for the warning lights on the instrument cluster.
Good thing I did, because I discovered cables that lost the isolation completely on the left side flasher/parking light, I replaced the whole set of cables, just in case.
I did the whole installation to the radio/cassette I got with the RRC, but it doesn't work at all, I think the radio is broken, it won't do anything. Oh, well, I guess I may try to repair or I'll just try to get a cheap replacement.
The oil warning light and the lights (6) for the instrument cluster, won't work. I do suspect the multi-function thingy in there, but I'll have to dig deeper.
I found out that some previous owner "bridged" a cheapo flasher (F550) on top of the original unit, it works, it's just, "lame".
I tried to check the oil level on the swivel pins. I'll try later, that is some serious stuck bolt, no way I can move the bolts for now.
I did close the sunroof manually, for the time being, I won't use it, although, I'll attempt some repair later on.
Other than that, It seems to be OK, as soon as I fix the oil light/instruments light issue I'll be on my way to the trails.
Monday, February 12, 2007
First weekend
Well,
it happened!
After the first weekend, I know this truck much better.
Miles on the clock 50,658 (not real, of course)
This is what I did:
- Whole inside out (well, mostly) deep cleaning including headliner, plugging back lose cables, *lots* of dirt, but *lots*, probably hadn't been cleaned since 89 :)
- Fixed the coolant level sensor (the cable inside was corroded)
- Fixed driver door lock mechanism.
- Fixed read tailgate lock mechanism.
- Check levels.
- Knock the roof back up, it was badly bump, probably dancing on the roof kind of action ;)
- Replaced clock
- Replaced driver side security belt.
- Replaced driver side rubber seal around the door
Standing issues:
-Rust on driver's door, big hole in the floor, oh well, nothing too bad, but a hole is a hole, I'll have to fix it one day
- Lights on instrument cluster won't work
- Some bulbs not working
- Sunroof stuck again.
- I'll check the swivel pin housing levels.
- Install radio-cassette
- Central locking mechanism.
Well, it could be worse for a 1989 RRC.
Later.
it happened!
After the first weekend, I know this truck much better.
Miles on the clock 50,658 (not real, of course)
This is what I did:
- Whole inside out (well, mostly) deep cleaning including headliner, plugging back lose cables, *lots* of dirt, but *lots*, probably hadn't been cleaned since 89 :)
- Fixed the coolant level sensor (the cable inside was corroded)
- Fixed driver door lock mechanism.
- Fixed read tailgate lock mechanism.
- Check levels.
- Knock the roof back up, it was badly bump, probably dancing on the roof kind of action ;)
- Replaced clock
- Replaced driver side security belt.
- Replaced driver side rubber seal around the door
Standing issues:
-Rust on driver's door, big hole in the floor, oh well, nothing too bad, but a hole is a hole, I'll have to fix it one day
- Lights on instrument cluster won't work
- Some bulbs not working
- Sunroof stuck again.
- I'll check the swivel pin housing levels.
- Install radio-cassette
- Central locking mechanism.
Well, it could be worse for a 1989 RRC.
Later.
Friday, February 02, 2007
OK, so what have I driven before?
Well,
I thought I should post some pictures of my previous Land Rover, the amazing Discovery Tdi300 pretty much stock, back in Spain.
These pictures in the heart of Quijote's Land:
This one in Alcaraz:
And these pictures in Cuenca, one of my Disco and another one from my Disco:
Also,
I drove a Ford Explorer 4WD (hated it) and a Jeep Grand Cherokee Limited 4x4, which was OK, but nothing like a Land Rover, the best 4x4 by Far.
I thought I should post some pictures of my previous Land Rover, the amazing Discovery Tdi300 pretty much stock, back in Spain.
These pictures in the heart of Quijote's Land:
This one in Alcaraz:
And these pictures in Cuenca, one of my Disco and another one from my Disco:
Also,
I drove a Ford Explorer 4WD (hated it) and a Jeep Grand Cherokee Limited 4x4, which was OK, but nothing like a Land Rover, the best 4x4 by Far.
Tuesday, January 30, 2007
Well,
First things first, I just got my "new" Land Rover. I got a 1989 Range Rover Classic from Roverdude (John) , engine and the important stuff looks great, but it sure can use some love and cleaning, that would be my role in the next months (or years).
This is how it looks at John's place:
More to come shortly after I get it delivered...
First things first, I just got my "new" Land Rover. I got a 1989 Range Rover Classic from Roverdude (John) , engine and the important stuff looks great, but it sure can use some love and cleaning, that would be my role in the next months (or years).
This is how it looks at John's place:
More to come shortly after I get it delivered...
Thursday, January 25, 2007
Welcome,
I'll be posting here my varied adventures and endeavors related to Land Rovers in my life.
Before moving to the US I was the happy owner of a Land Rover Discovery 300Tdi.
When I moved here I've tried several SUVs but nothing I liked as much.
So now I am in a quest to find the right Land Rover for my little offroad excursions.
I'll keep this site with pictures and posts about the various adventures and misadventures Land Rover related.
Enjoy.
I'll be posting here my varied adventures and endeavors related to Land Rovers in my life.
Before moving to the US I was the happy owner of a Land Rover Discovery 300Tdi.
When I moved here I've tried several SUVs but nothing I liked as much.
So now I am in a quest to find the right Land Rover for my little offroad excursions.
I'll keep this site with pictures and posts about the various adventures and misadventures Land Rover related.
Enjoy.
Subscribe to:
Posts (Atom)